Cowleys Pest Services Before & After Photos

Recently, I was dispatched to a residence in South River, NJ. The homeowner was having a problem with yellow jackets. These wasps with their distinctive yellow-black coloration are one of the most territorial, aggressive stinging insects we come across. They seem almost anxious to sting at the slightest provocation.  

Although yellow jackets often nest outdoors in rodent burrows and other cavities, sometimes they decide to build nests inside homes. Decks, eaves, soffits, gutters, and even holes in brick are all potential yellow jacket nesting sites. Here, the wasps found an opening of a roof dormer soffit. The homeowner realized he had a problem because he was hearing buzzing and light scratching/clicking sounds in his upstairs ceiling. These wasps, as many wasp species, will chew on wood because cellulose makes for great nesting material. They are powerful enough to chew through drywall. These were some of the sounds that the homeowner was hearing. By the way, don’t knock on the drywall. It may be so paper thin that you’ll make a hole in it!

Upon arrival, I immediately inspected the exterior and observed yellow jackets entering and exiting the dormer soffit. I also saw a paper hood protruding out of the soffit that was clearly part of their nest. Yellow jackets build paper nests that are completely surrounded by a paper envelope. This paper-like pulp is a mixture of chewed wood fibers and their saliva. Inside, I inspected the upstair ceiling and found that the moisture from the nest had soften the sheetrock.

It was time to treat the nest. Because of the aggressive nature of these wasps, i don’t take any chances. I put on my protective suit with a hat and veil to protect me against any insect stings. When yellow jacket nests are first treated, you are often “greeted” by a swarm of angry, aggressive wasps. A individual yellow jacket can sting multiple times, so f a nest is disturbed you can be facing dozens of painful stings. For obvious reasons, active yellow jacket nests, especially those built in challenging locations, are not DIY homeowner projects. 

I climbed on the roof and used an extension pole sprayer so I could keep as safe a distance as possible from the nest, and injected a dust into the soffit opening. The dust will be shared with all of the members of the nest and it won’t take long for the queen and the rest of the colony to be eliminated.

I was recently sent to a home in Edison, NJ for a Cowleys home protection plan (HPP) scheduled service. The homeowner had issues with rodents around the home and I found out why she was concerned.

In my inspection, I found an exterior rodent bait station by the shed that was completely depleted from the last service. The interior rodent bait stations in the garage and crawl space were also empty.

After completing the service around the home I rebaited all the existing bait stations. I then performed a thorough inspection around the house to determine how the rodents were entering the structure. I found a sizable gap around the piping where the gas line was passing through the foundation. To close up this access point, I used a copper mesh material which does not rust or disintegrate like steel wool. 

Since this customer's rodent pressure was so high. I added an additional large rodent bait station (LP) to the exterior of the home.

A couple in Manalapan, NJ had a major issue with foxes living underneath their deck. We were sent out, inspected the entire area, and set-up our devices to safely retrieve the fox family. Shortly after setting up trapping, the foxes were safely retrieved and we relocated them to a new, humane location.

Although the foxes were safely removed, that was only half the battle. The deck area was still vulnerable for future intrusions from foxes and other nuisance wildlife.

To fix this, we dug a trench around the entire perimeter of the deck area that was 1 ft deep and 1 ft out from the bottom of the deck and then installed hardware cloth. This creates a sturdy "L shaped" perimeter that the foxes (and other nuisance wildlife) are unable to dig through. 

Once we finished installing the hardware cloth, we installed lattice around the entire perimeter of the deck. Now the deck is not only protected from future intrusions from any nuisance wildlife, but it looks aesthetically pleasing as well. 

A new residential client in Highland, NJ contacted Cowleys after hearing birds chirping in his attic. We went out, inspected the attic and found starlings, their nesting debris, and droppings all over the insulation.

Starlings are an invasive species and have a negative impact on the US economy and ecosystem. They are stocky black birds with short tails, triangular wings, and long, pointed bills. They nest in holes and cavities and often exploit openings in buildings to build a nest inside the home. So how did they invade this home? Well, after a thorough inspection of the exterior we discovered that the home had a builders gap.

A builders gap is a gap between the fascia board (where the gutter is hung) and roof decking. This gap is caused when roof decking is stopped too short and is not flushed with the fascia. The gap is meant to help with airflow throughout the attic but also is a perfect place for nuisance birds and wildlife to enter your home. Because the roof shingles only cover the gap, birds and nuisance wildlife can wiggle under the shingles and slip right in — which is exactly what the starlings did!

First, we carefully removed all the nesting debris and the contaminated insulation and disinfected the entire attic. Next, we installed over 150 feet of Pest Blok Metal Roof Edge Cap to close the builders' gap. This material is constructed out sturdy sheet metal with a silicone protected polyester coating that will protect the area against a variety of nuisance birds and wildlife.

After our wildlife team had safely removed all the squirrels out from this attic, we're here to remove the contaminated insulation and add TruSoft blown-in cellulose insulation. The squirrels were present in the attic for such a long time that the insulation was soaked with their urine and their feces were everywhere!

So we carefully removed all the contaminated insulation and then vacuumed and disinfected the attic. Next, we added TruSoft blown-in cellulose insulation, which will fill the attic to its recommended insulation levels. TruSoft blown-in cellulose insulation has a higher R-value than standard fiberglass insulation, has the highest Class-1 fire safety rating, is resistant to mold and pests, and is eco-friendly!